Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Aug 14, 2025 11:57 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 34 posts ]  Go to page Previous  1, 2
Author Message
PostPosted: Thu Jan 29, 2015 9:15 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Nov 09, 2008 4:29 pm
Posts: 140
Location: Markham, ON (Canada)
First name: Charlton
Last Name: Wang
Focus: Build
Status: Amateur
Thanks, Tai Fu. That's too bad. I guess the slower grinder has much more modest air requirements. Maybe I'll get that instead.

Charlton


Top
 Profile  
 
PostPosted: Fri Jan 30, 2015 9:03 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4915
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
I see that they did change the air requirement . The souix uses less air. I will change the listing thanks
As for run out , these have very little as compared dremel tools. The die grinder uses a roller bearing and not a bushing.

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


Top
 Profile  
 
PostPosted: Fri Jan 30, 2015 9:31 am 
Offline
Cocobolo
Cocobolo

Joined: Sun Nov 09, 2008 4:29 pm
Posts: 140
Location: Markham, ON (Canada)
First name: Charlton
Last Name: Wang
Focus: Build
Status: Amateur
bluescreek wrote:
I see that they did change the air requirement . The souix uses less air. I will change the listing thanks
As for run out , these have very little as compared dremel tools. The die grinder uses a roller bearing and not a bushing.

I thought the 70k one in the link was the Sioux. It's the one that presumably needs 5.5cfm.

Charlton


Top
 Profile  
 
PostPosted: Fri Jan 30, 2015 10:02 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4915
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
I did correct that. I think there was a typo on the site.
I apologized for that.
there was a 5.4 at 90 psi rating it is adjustable. You can turn the speed up and down.

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


Top
 Profile  
 
PostPosted: Fri Jan 30, 2015 10:06 am 
Offline
Cocobolo
Cocobolo

Joined: Sun Nov 09, 2008 4:29 pm
Posts: 140
Location: Markham, ON (Canada)
First name: Charlton
Last Name: Wang
Focus: Build
Status: Amateur
bluescreek wrote:
I did correct that. I think there was a typo on the site.
I apologized for that.
there was a 5.4 at 90 psi rating it is adjustable. You can turn the speed up and down.

Thanks, John.


Top
 Profile  
 
PostPosted: Fri Jan 30, 2015 10:35 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4915
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
you are most welcome
we are here to help

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


Top
 Profile  
 
PostPosted: Fri Jan 30, 2015 11:01 am 
Offline
Cocobolo
Cocobolo

Joined: Tue Jun 30, 2009 3:20 pm
Posts: 456
Focus: Build
John, What about oil mist?


Top
 Profile  
 
PostPosted: Sat Jan 31, 2015 8:53 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4915
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
if you check out the video I use a paper towel that is folded over the end of the exhaust hose and taped to it . You only need a drop of oil . if you over oil that can be an issue. The higher speed and the bearings make it a cleaner cut. These are used at CF Martin and Custom pearl Inlay among others.

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


Top
 Profile  
 
PostPosted: Sat Jan 31, 2015 8:56 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Sep 24, 2008 8:55 pm
Posts: 3820
Location: Taiwan
First name: Tai
Last Name: Fu
City: Taipei
Country: Taiwan
Focus: Repair
Status: Semi-pro
I found that with proper oiling I can hear a difference in the sound. When oil gets where it needs to go the RPM increases quite a bit...

_________________
Cat-gut strings are made from kitten guts, stretched out to near breaking point and then hardened with grue saliva. As a result these give a feeling of Pain and anguish whenever played, and often end up playing themselves backwards as part of satanic rituals.

Typhoon Guitars
http://www.typhoon-guitars.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 34 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours


Who is online

Users browsing this forum: J De Rocher, TimAllen and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com